|
|
Post by royjulius on Sept 7, 2010 16:56:16 GMT -5
Hi folks. I have a CT standard and I am reluctant to take the back wheel off to change a tire. It looks a little daunting with the 3 speed hub. What's the recommended procedure for removing the rear wheel?
|
|
|
|
Post by pjespers on Sept 7, 2010 22:01:24 GMT -5
Removing the rear wheel is easier with a Master-Link on your chain. I got mine from my local LBS. I've never done it without one.
|
|
|
|
Post by royjulius on Sept 8, 2010 14:19:21 GMT -5
Thanks. I'll go to the LBS.
|
|
|
|
Post by tutorblk on Sept 8, 2010 16:43:55 GMT -5
Hi - here's a copy of the BikeE manual - it has a section dealing with removal of the rear wheel (page 15). Basically: disconnect the dualDrive cable; Undo the nuts; get the derailleur to slacken the chain a bit if you need to; drop the wheel out. Replacement is a reversal of the process: just make sure you get the wheel properly in the dropouts - the manual's quite clear on where to put the chain on the derailleur, (smallest cog so you get most slack). Cheers, Brian Attachments:
|
|
|
|
Post by royjulius on Sept 13, 2010 10:20:49 GMT -5
Awesome! Thanks alot!! This looks easier than I thought it would be. Cool!
|
|
kelly
Junior Member
Posts: 9
|
Post by kelly on Dec 11, 2013 22:42:36 GMT -5
Like a lot of other things, you just have to start.
|
|
