Remove Rear Swing Arm

[recesslife]

Does anyone know how to remove the rear swing arm from the frame?

[Robin Parkes]

I should have answered a lot sooner. You would be better off asking a dealer such as Peter Stull bicycleman.com or Mike Librik of Easy Street Recumbents www.easystreetrecumbents.com

Regards,

Robin.

[capeman01]

I know this is old but there are 4 hex screws under the bike, loosen them only, then you need a socket or piece of pipe the same size as the inner sleeve that holds the swing arm to the bike. You will need a good surface that the bike can lay on. start tapping with a hammer to drive the sleeve from the swing arm. I mean hit it!